Osstem Implant K3 - Light PCB Check and Diagnosis

90
Ⅱ Wiring Test
v Light ON/OFF
Light PCB How to check Light PCB
①
Check AC_IN, AC12V voltage - tester
②
Perform 7A current test on the fuse
③
Perform visual check on D2 LED (D2 LED is turned
on/off when the Dr. Table membrane light button is
pressed)
④
Check the light output power voltage (LAMP): AC12V
should be read when turning the light button ON
①
②
④
③
『LIGHT Test』
§ Light PCB Check and diagnosis