23
Ⅲ K3 UNIT CHAIR Installation
UNIT INSTALLATION
§ Installation procedures #4
7. Fix Unit Assembly
As shown in <Figure 07>, fasten the bolt fixing
the Main Plate (C) and the Unit Assembly (A) and
tightly fasten the bolt that was temporarily
fastened in Step 4.
8. Assemble Assist Table Assembly
As shown in <Figure 08>, put the Assist Table
Assembly (F) into the Unit Assembly (E).
< Figure 08 >
< Figure 07 >
Use 6mm T-wrench
『UNIT Installation』
To Next Page
Loading...