When fully CCW you get to SKIP, if selected the step timing will be ignored by the transport bar, thus
making the sequence length shorter.
–––––––––––––––––––––
Use Skip to abruptly change the timing and feel of the pattern.
Randomize Skip steps to get different sequence lengths every bar and adding and removing notes,
in Retrig on Random Perform screen.
–––––––––––––––––––––
Offset, sets the time deviation of the note from -40% to 40% of the current time division. 25% is a
±
quarter deviation from the duration of the step.
MULTI KEYBOARD
In Multitrack Keyboard you can perform all tracks at once as a drum kit or each track individually with
the full keyboard with the press of a button. There’s also handy shortcuts for soloing and muting
individual tracks.
1st to 12th column is the performance area. It changes from 8 pads highlighted, one per track, to
play as a drum kit; or a full keyboard when Arm Track is active (14th column).
- 13th column is Roll rate selection.
- 14th column selects Arm Track. Without any selection and by default, the 8 highlighted pads
play each track (track trigger). If you select one track in this column, the keyboard will play as a
regular full keyboard on that track (remember MIDI channel can be set differently per track).
Activate Recording without any armed track to record with the track triggers as a drum pad. Arm a
track to play over polyphonic synths. Review the Rec menu to take full advantage of the features.
- 15th column is Mute per track.
- 16th column is Solo per track, pressing several pads of the column makes Solo groups.
To Next Page
Loading...