OXI PIPE
OXI Pipe is a breakout module that replicates the 8 CVs and 8 Gates outputs and the Clock and
CV/Reset inputs of the OXI One. It doesn’t add any extra signal to the OXI One.
Both Pipe and One’s outputs can be used simultaneously (like a passive Mult), but inputs should not
be used at the same time on the One itself and the Pipe.
A HDMI cable is included for free with each Pipe. If you need a cable with different characteristics
(length, connector angle, etc.) you need to purchase a HDMI cable that is 2.0 or higher specification.
To Next Page
Loading...