Panasonic AAD03011 - Troubleshooting and Fault Handling; Details and Remedies for Fault Trips

d21 DT277 OPEN Arrival hold frequency ˴ 0࡮0.5㨪250 Hz 0-25000 3
d22 DT278 CLOSE Frequency 1 0࡮0.5㨪250 Hz 0-25000 3
d23 DT279 CLOSE Frequency 2 0࡮0.5㨪250 Hz 0-25000 3
d24 DT280 CLOSE Frequency 3 0࡮0.5㨪250 Hz 0-25000 3
d25 DT281 CLOSE Frequency 4 0࡮0.5㨪250 Hz 0-25000 3
d26 DT282 CLOSE Frequency 5 0࡮0.5㨪250 Hz 0-25000 3
d27 DT283 CLOSE Frequency 6 0࡮0.5㨪250 Hz 0-25000 3
d28 DT284 OPEN Accel./decel. time 1 0࡮0.1㨪999 sec 0-9990 2
d29 DT285 OPEN Accel./decel. time 2 0࡮0.1㨪999 sec 0-9990 2
d30 DT286 OPEN Accel./decel. time 3 0࡮0.1㨪999 sec 0-9990 2
d31 DT287 OPEN Accel./decel. time 4 0࡮0.1㨪999 sec 0-9990 2
d32 DT288 OPEN Accel./decel. time 5 0࡮0.1㨪999 sec 0-9990 2
d33 DT289 OPEN Accel./decel. time 6 0࡮0.1㨪999 sec 0-9990 2
d34 DT290 CLOSE Accel./decel. time 1 0࡮0.1㨪999 sec 0-9990 2
d35 DT291 CLOSE Accel./decel. time 2 0࡮0.1㨪999 sec 0-9990 2
d36 DT292 CLOSE Accel./decel. time 3 0࡮0.1㨪999 sec 0-9990 2
d37 DT293 CLOSE Accel./decel. time 4 0࡮0.1㨪999 sec 0-9990 2
d38 DT294 CLOSE Accel./decel. time 5 0࡮0.1㨪999 sec 0-9990 2
d39 DT295 CLOSE Accel./decel. time 6 0࡮0.1㨪999 sec 0-9990 2
d40 DT296 OPEN Hold current
0.0㨪100
A 0-1000 2
d41 DT297 CLOSE Hold current 0.0㨪100 A 0-1000 2
d42 DT298 STOP time of OPEN/ CLOSE hold operation 0࡮0.1㨪999
sec
0-9990 2
d43 DT299 OPEN arrival hold wait frequency 0.5㨪250 Hz 50-25000 3
d44 DT300 CLOSE arrival hold wait frequency 0.5㨪250 Hz 50-25000 3
d45 DT301 OPEN arrival hold wait time 0.0㨪10 sec 0-100 2
d46 DT302 CLOSE arrival hold wait time
0.0㨪10 sec 0-100 2
d47 DT303 OPEN start timer (SW mode) ˴ 0.0㨪3.0 sec 0-300 3
d48 DT304 OPEN deceleration timer (SW mode) 0.0㨪3.0 sec 0-300 3
d49 DT305 CLOSE start timer (SW mode) 0.0㨪3.0 sec 0-300 3
d50 DT306 CLOSE deceleration timer (SW mode) 0.0㨪3.0 sec 0-300 3
d51 DT307
Operation frequency when
power supply is turned ON
0࡮0.5㨪250
Hz
0-25000 3
d52 DT308 Door width measurement frequency 0.5㨪250 Hz 50-25000 3
d53 DT309 Password setting in D region 0࡮1㨪999  0-999 1
87
d54 DT310 Fault CLOSE operation frequency 1 (Hz) 0࡮0.5㨪250 Hz 0-25000 3
d55 DT311 Fault CLOSE operation frequency 2 (Hz) 0࡮0.5㨪250 Hz 0-25000 3
Parameter
No.
Register
No.
Function nam
Displayed
Data
Unit
Internal
Data
Data
type
䌤19 DT275 OPEN Frequency 5 0䊶 0.5 䌾250 Hz 0-25000 3
䌤20 DT276 OPEN Frequency 6 0䊶 0.5 䌾250 Hz 0-25000 3