Panasonic AAD03011 - Parameter Descriptions; Functional Descriptions(Parameter Table)

No. Parameter name Setting range
Factory
setting
data
ڎP01 0࡮0.1 to 999
0࡮0.1 to 999
0.5
ڎP02 1ST DECELERATION TIME(s) 0.5
P03 50࡮ 60࡮ FF 50
P04 0࡮1
ڎP05 TORQUE BOOST LEVEL(%) 0 to 40 10
P06 ELECTRONIC THERMAL FUNCTION SELECT 0࡮1࡮ 2࡮3
P07 SETTING OF THERMAL CURRENT(A) 01 to100 3.6
P08 OPERATION COMMAND SELECT 0 to 3 0
P09 FREQUENCY SETTING SIGNAL 0 to 6 0
P10 STOP MODE 0࡮1
P11 STOP FRENQENCY(Hz) 05 to 60 0.5
P12 DC BRAKE TIME(s) 0࡮0.1 to 120 000
P13 DC BRAKE LEVEL 0 to 100 00
P14 MAX. OUTPUT FREQUENCY (Hz) 50 to 250 50.0
P15 BASE FREQUENCY (Hz) 45 to 250 50.0
P16 OVERCURRENT STALL PREVENTION FUNCTION 0࡮1
P17 OVERVOLTAGE STALL PREVENTION FUNCTION 0࡮ 1
P18 SKIP FREQUENCY 1 (Hz) 0࡮0.5 to 250 000
P19 SKIP FREQUENCY 2 (Hz) 0࡮0.5 to 250 000
P20 SKIP FREQUENCY 3 (Hz) 0࡮0.5 to 250 000
P21 0 to10 0
P22 CURRENT LIMIT FUNCTION (s)
SKIP FREQUENCY BAND WIDTH
0࡮ 0.1 to 9.9
P23 START MODE
RIDE-THROUGH RESTART
0࡮1࡮2࡮ 3
P24 0࡮1࡮2
P25 WAIT TIME (s) 0.1 to 100 0.1
P26 RETRY FUNCTION SELECT 0࡮1࡮ 2࡮ 3
P27 RETRY TIMES 1 to 10 1
P28 LOWER FREQUENCY CLAMP(Hz) 0

5 to 250 0.5
P29 05 to 250 250
Functional Descriptions(Parameter Table)
䂓 P region parameters: P01 to P81
The parameter table consists of "P region parameters: P01 to P81" and
''d region parameters: d00 to d65".
36
1ST ACCELERATION TIME(s)
V/F PATTERN
V/F CURVE
UPPER FREQUENCY CLAMP (Hz)
0
0
0
0
0
0
1
1
2