8
3.2 Connect with AP Mode
* (For Android 5.0 and above & iOS 11 and above only)
i. Press and hold the “SETUP” button on the network
adaptor for 10 seconds.
ii. Release the “SETUP” button when the STATUS LED
starts to blink in orange.
iii. Tap “NEXT”.
iv. Tap “JOIN” to connect “Panasonic-CZ-T-wirelessAP”
network.
SSID:Router_SSID1
v. Enter the password of the selected wireless router
and continue.
vi. The LINK LED will light up when the network adaptor
successfully connects to the server.
Tap “NEXT” and proceed to instruction 4.
* During network adaptor connecting to wireless
router, STATUS LED and LINK LED will blink
simultaneously.
To Next Page
Loading...
