Network Setting
Item Contents
LAN mode Displays the LAN mode (Wired LAN / Wireless LAN / Wireless LAN (AP)).
DHCP Enable (On) or disable (Off) DHCP.
AutoIP
Enable (On) or disable (Off) Auto IP. If DHCP is disabled, this setting cannot
be changed. This setting can also be changed from Network Setting Tool
(page 136).
IP Address
Set the IP address. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 136).
Subnet Mask
Set the subnet mask. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 136).
Default Gateway
Set the default gateway. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 136).
DNS Server 1 Set the primary DNS server.
DNS Server 2 Set the secondary DNS server.
WINS Server 1 Set the primary WINS server.
WINS Server 2 Set the secondary WINS server.
IP Filtering Enable (On) or disable (Off) the IP filtering function.
HTTPd
Enable (On) or disable (Off) the HTTPd.
If HTTPd is disabled, "Configuration Web" is not available.
MAC Address Display the scanner's MAC Address.
Host Name
*1
Set the host name for the scanner (up to 15 characters).
Location
*1
You can input the location comment (up to 31 characters).
*1
For details, refer to "12.2.1 Available characters in Configuration Web" (page 95).
6.2.3 Information display area
40
To Next Page
Loading...
