Panasonic KX-HDV100 - Cfg_Pkey_Path; Http_Ssl_Verify; Firmware Update Settings; Firm_Upgrade_Enable

CFG_PKEY_PATH
Value Format STRING
Description Specifies the URI where the private key is stored.
Value Range Max. 384 characters
Default Value Empty string
HTTP_SSL_VERIFY
Value Format INTEGER
Description Specifies whether to enable the verification of the root certificate.
Value Range
• 0 (No verification of root certificate)
• 1 (Simple verification of root certificate)
• 2 (Precise verification of root certificate)
Note
• If set to "0", the verification of the root certificate is disabled.
• If set to "1", the verification of the root certificate is enabled. In
this
case, the validity of the certificate’s date, certificate’s chain,
and the confirmation of the root certificate will be verified.
• If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
• If the unit has not obtained the current time, verification will not
be performed irrelevant of this setting. In order to perform
verification it is necessary to first set up the NTP server.
Default Value 0
5.3.6 Firmware Update Settings
FIRM_UPGRADE_ENABLE
Value Format BOOLEAN
Description Specifies whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
• Manual firmware updates from the Web user interface
(® see
4.7.3 Upgrade Firmware) can be performed regardless of this
setting.
• Firmware updates using TR-069 can be performed regardless
of this setting.
Value Range
• Y (Enable firmware updates)
• N (Disable firmware updates)
Document Version 2015-02 Administrator Guide 173
5.3.6 Firmware Update Settings