EasyManua.ls Logo

Panasonic KX-HTS32 - PBX Configuration-[1-5] System-Timers

Panasonic KX-HTS32
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Screen / Tab Setting item Description Input Type Note
4.Numbering
Plan
Dialing Plan
Trunk Dialing Plan
(32 digits)
Specifies the trunk dialing
plan.
Dial4
2.2.5 PBX Configuration—[1-5] System—Timers
Description
Various system-timers can be programmed.
Screen / Tab Setting item Description Input Type Note
5.Timers DialInter-digit (s) Specifies the length of
time within which
subsequent digits must be
dialed before the PBX
sends a busy tone.
Select
RecallHold
Recall (s)
Specifies the length of
time until the holding
extension receives a Hold
Recall ring or alarm tone
when a held call remains
unretrieved.
Select
Recall
Disconnect after
Recall (x60s)
Specifies the length of
time for Transfer Recall
and Call Park Recall.
(Hold Recall is not
applied)
Select
Limited Call Time
CO-CO Duration
Time (x60s)
Specifies the length of
time that a trunk-to-trunk
call can be maintained
before being
disconnected.
Select
Limited Call Time
Extension-CO/
Extension Duration
Time (x60s)
Specifies the length of
time that an extension-to-
trunk / extension-to-
extension call can be
maintained before being
disconnected.
Select
2.2.5 PBX Configuration—[1-5] System—Timers
24 Programming Item List

Table of Contents

Other manuals for Panasonic KX-HTS32

Related product manuals