Panasonic KX-HTS32 - Network Configuration-[8] NAT; Network Configuration-[8-1] NAT-NAT Settings; Network Configuration-[8-2] NAT-Virtual Server

3.7 Network Configuration—[8] NAT
3.7.1 Network Configuration—[8-1] NAT—NAT Settings
Description
The NAT settings can be programmed.
Screen / Tab Setting item Description Input Type Note
1.NAT
Settings
NAT Settings Used to Enable or Disable
the Network Address
Translation feature.
Radio
3.7.2 Network Configuration—[8-2] NAT—Virtual Server
Description
The virtual server settings for NAT can be programmed.
Screen / Tab Setting item Description Input Type Note
2.Virtual
Server -
Virtual
Server
Add Button Clicking this button adds a
virtual server
configuration.
-
Application Name Configured Application
Name for Virtual Server
rule.
-
Private IP Private IP address of
Virtual Server rule.
-
Remote IP Remote IP address of
Virtual Server rule.
-
Private Start Port Private Port starting
range.
-
Private End Port Private Port ending range.
For a single port the start
and end are both the
same
-
Protocol Virtual Server protocol -
TCP or UDP or Both i.e.
TCP/UDP.
-
Public Start Port Public Port starting range. -
Public End Port Public Port ending range.
For a single port the start
and end are both the
same
-
Enable To enable the specified
entry of the virtual server.
-
WAN Interface WAN interface on which
the Virtual Server rule is
configured.
-
3.7 Network Configuration—[8] NAT
76 Programming Item List