Panasonic KX-HTS32 - PBX Configuration-[3-4] Trunk-Caller ID Modify & Block

Screen / Tab Setting item Description Input Type Note
DDI Table - DDI
Number
Specifies the DDI number. Dial1
DDI Table - Name Specifies the name for the
DDI number.
Text LCD
DDI Table -
Destination - Day
Specifies the DDI
destination in the "Day"
mode of time service.
Select
DDI Table -
Destination -
Lunch
Specifies the DDI
destination in the "Lunch"
mode of time service.
Select
DDI Table -
Destination - Night
Specifies the DDI
destination in the "Night"
mode of time service.
Select
2.4.4 PBX Configuration—[3-4] Trunk—Caller ID Modify & Block
Description
Settings can be made for modifying and blocking Caller ID.
Screen / Tab Setting item Description Input Type Note
4.Caller ID
Modify &
Block
Incoming Call
Block when No
Caller ID
When there is no Caller
ID, refuse incoming call.
Radio
Caller ID Modify
Table - Area Code
(6 digits)
Specifies the leading
number (area code) to
look for in the incoming
caller’s number.
Text
Numeric
Caller ID Modify
Table - Removed
Number of Digits
Specifies the number of
digits to be removed from
the beginning of the
incoming caller’s number.
Select
Caller ID Modify
Table - Added
Number (4 digits)
Specifies the number to
be added to the incoming
caller’s number in the
place of the removed
digits.
Dial1
Caller ID Modify by
Length of Digits -
Minimum Caller ID
Digits
Selects minimum number
of caller ID digits.
Select The value of National
must be smaller than
that of International.
Caller ID Modify by
Length of Digits -
Added Number (6
digits)
Specifies the added
number.
Dial1
Analog Trunk Enables Caller ID Modify
by Length of Digits for the
analog trunk.
Radio
2.4.4 PBX Configuration—[3-4] Trunk—Caller ID Modify & Block
Programming Item List 41