Panasonic KX-HTS32 - PBX Configuration-[3-2] Trunk-DIL; PBX Configuration-[3-3] Trunk-DDI

Screen / Tab Setting item Description Input Type Note
1.Port-Analog -
Collect Call
Reject (for
Brazil)
Mode Enables the PBX to
automatically reject collect
calls. This setting is only for
users in Brazil.
Radio
Wait Time Selects the length of time that
the PBX waits before sending
a flash signal to reject a collect
call. This setting is only for
users in Brazil.
Select
Flashing Time Selects the length of the flash
signal that the PBX sends to
reject a collect call. This setting
is only for users in Brazil.
Select
2.4.2 PBX Configuration—[3-2] Trunk—DIL
Description
DIL settings can be programmed for the trunk.
Screen / Tab Setting item Description Input Type Note
2.DIL Day Specifies the DIL
destination in the "Day"
mode of time service.
Select
Lunch Specifies the DIL
destination in the "Lunch"
mode of time service.
Select
Night Specifies the DIL
destination in the "Night"
mode of time service.
Select
2.4.3 PBX Configuration—[3-3] Trunk—DDI
Description
DDI settings can be programmed for the trunk.
Screen / Tab Setting item Description Input Type Note
3.DDI Dialing Plan - DDI Selects the suitability of a
DDI incoming call.
Select
Dialing Plan -
Remove Digit
Specifies the number of
leading digits to be
removed from the
incoming called number
for DDI distribution.
Select
Dialing Plan -
Additional Dial
Specifies the number to
be added to the incoming
called number in the place
of the removed digits for
DDI distribution.
Dial1
2.4.2 PBX Configuration—[3-2] Trunk—DIL
40 Programming Item List