Panasonic KX-HTS32 - PBX Configuration-[2-6] Extension-Analog SLT Property; PBX Configuration-[2-7] Extension-SIP Extension Property

2.3.6 PBX Configuration—[2-6] Extension—Analog SLT Property
Description
Analog SLT property settings can be programmed.
Screen / Tab Setting item Description Input Type Note
6.Analog SLT
Property
SLT Off Hook Time Selects the SLT off hook
time.
Select
SLT Flash
Detection
Selects the SLT flash
detection.
Select
Flash Timing - Min. Selects the minimum flash
timing.
Select
Flash Timing -
Range
Selects the range of flash
timing.
Select
Ring Tone Pattern
Option
Selects the ring tone
pattern option.
Select
2.3.7 PBX Configuration—[2-7] Extension—SIP Extension
Property
Description
SIP extension property settings can be programmed.
Screen / Tab Setting item Description Input Type Note
7.SIP
Extension
Property
Domain for SIP
Extension
Specifies the domain for
SIP extension.
Text3 If this setting is blank,
the system
automatically adds the
LAN's IP address to
the domain.
IP Address of SIP
Extension in
existing router
Specifies the IP address
and subnet mask of the
SIP extension in the
existing router.
IP Address
Subnet
Mask
DSP－IP Side -
Gain1 (Network to
PBX)
Selects the gain of the IP
side (Network to PBX).
Select
DSP－IP Side -
Gain2 (PBX to
Network)
Selects the gain of the IP
side (PBX to Network).
Select
DSP－PCM Side -
Gain1 (PBX to
Network)
Selects the gain of the
PCM side (PBX to
Network).
Select
DSP－PCM Side -
Gain2 (Network to
PBX)
Selects the gain of the
PCM side (Network to
PBX).
Select
DSP－PCM Side -
Echo Canceller
Type
Selects the echo canceller
type of the PCM side.
Select
2.3.6 PBX Configuration—[2-6] Extension—Analog SLT Property
Programming Item List 35