Panasonic KX-HTS32 - Network Configuration-[7] Firewall; Network Configuration-[7-1] Firewall-Firewall Setting; Network Configuration-[7-2] Firewall-Packet Filtering

3.6 Network Configuration—[7] Firewall
3.6.1 Network Configuration—[7-1] Firewall—Firewall Setting
Description
The firewall settings can be programmed.
Screen / Tab Setting item Description Input Type Note
1.Firewall
Setting
Firewall Setting It allows for the enabling
or disabling of the firewall
in the PBX's.
Radio
3.6.2 Network Configuration—[7-2] Firewall—Packet Filtering
Description
The packet filtering settings for the firewall can be programmed.
Screen / Tab Setting item Description Input Type Note
2.Packet
Filtering -
Packet
Filtering
Add Button Clicking this button adds a
packet filtering rule.
-
Enable Packet
Filter
To enable or disable the
Packet Filter feature of the
PBX. To Enable, select the
check box.
Check
Source IP Filter IP Address range of
the local machine under
the PBX.
- Indicates "*" when ALL
is selected in the
Source IP Type.
Source Port Filter Port number range
of the local machine under
the PBX.
- Indicates "*" when
Source Port is blank.
Destination IP IP address of the
destination.
- Indicates "*" when ALL
is selected in the
Destination IP Type.
Destination Port Port address of the
destination.
- Indicates "*" when
Destination Port is
blank.
Protocol To select the protocol. The
options available are TCP,
UDP, ICMP, AH, ESP and
ALL.
-
Ingress Interface Input interface of the
packet.
-
Egress Interface Output interface of the
packet.
-
Source MAC
Address
Source MAC Address of
the packet originating
host.
-
3.6 Network Configuration—[7] Firewall
72 Programming Item List