Panasonic KX-HTS32 - Network Configuration-[5] Route; Network Configuration-[5-1] Route-Static Routing

3.4 Network Configuration—[5] Route
3.4.1 Network Configuration—[5-1] Route—Static Routing
The static routing settings can be programmed.
Screen / Tab Setting item Description Input Type Note
1.Static
Routing
Destination IP To enter the destination IP
Address of a routing entry.
IP Address
Subnet Mask To enter the Subnet Mask
of a routing entry.
Subnet
Mask2
Gateway To enter the Gateway
address of a routing entry.
IP Address This feature is not
available when WAN
set PPPoE is selected
in interface.
interface To enter outgoing interface
name for this route. It can
be selected from a
dropdown
Select
3.4 Network Configuration—[5] Route
Programming Item List 65