Panasonic KX-HTS32 - Maintenance-[2-4] System Control-System Reset; Maintenance-[3] Utility; Maintenance-[3-1] Utility-USB

4.3.4 Maintenance—[2-4] System Control—System Reset
Screen / Tab Setting item Description Input Type Note
4.System
Reset
System Reset Reset button
When programming
changes or other changes
to PBX settings require a
system reset, this
command allows a reset
to be performed remotely
from Web Maintenance
Console. When the
system is reset, any
settings not saved to the
System Memory are lost.
A backup should be
performed before the reset
to ensure no data is lost.
However, a backup should
not be performed if
settings or data have
recently been imported
into the system, because
performing a backup
would overwrite the
imported data with the
current PBX settings.
-
4.4 Maintenance—[3] Utility
Description
This section serves as reference for operating instructions for the Utility menu on the Maintenance screen of
Web Maintenance Console.
4.4.1 Maintenance—[3-1] Utility—USB
Screen / Tab Setting item Description Input Type Note
1.USB Capacity Capacity (Byte)
(Separated by comma for
each 3 digits)
-
Used Usage capacity (Byte)
(Separated by comma for
each 3 digits)
-
Available Free space (Byte)
(Separated by comma for
each 3 digits)
-
4.3.4 Maintenance—[2-4] System Control—System Reset
84 Programming Item List