4.4.3 Maintenance—[3-3] Utility—Email Notification
Screen / Tab Setting item Description Input Type Note
3.Email
Notification-
Email
Notification
System Alarm-
Filtering Setting-
Major
For Filtering Setting,
select the check boxes to
specify whether to receive
e-mails when there is a
Major alarm, a Minor
alarm, or both.
Check
System Alarm-
Filtering Setting-
Minor
Same as above Check
System Alarm-
Email Address 1
Specify one or two e-mail
addresses that will receive
system alarm alert
messages.
Text Email
System Alarm-
Email Address 2
Same as above Text Email
System Alarm-
Subject
In Subject enter the text
that will be used for the
subject header of e-mails
that are sent.
Text5
Voice Mail-
Subject
Voice mail subject Text5
Send Test Email-
Email Address
Send a test e-mail to
confirm that e-mail
sending settings are
correctly configured.
Text Email
Send Test Email-
Subject
In Subject, enter text to be
used as the subject line of
the e-mail sent.
Text5
3.Email
Notification-
SMTP
Mail Sender
Information Name
Specifies the name to be
used as the sender of the
e-mails from the PBX.
Text5
Mail Address Specifies the sending e-
mail address for
messages sent from the
PBX. This address, for
example, could be set as
the e-mail address of an
administrator.
Text Email
SMTP Server for
Relay-SMTP
Server Address
SMTP Server Address Radio
SMTP Server for
Relay-IP Address
Specifies the IP address
of the SMTP server to be
used to send e-mails.
IP Address
4.4.3 Maintenance—[3-3] Utility—Email Notification
86 Programming Item List