Panasonic KX-HTS32 - Confirming Connections

Screen / Tab Setting item Description Input Type Note
Modify Button Clicking this button allows
you to modify a virtual
server configuration.
-
2.Virtual
Server -
Configure
Virtual
Server
Application Name -
Custom application
Custom application Text Up to 40 characters.
Protocol Specify Virtual Server
protocol - TCP or UDP or
Both i.e. TCP/UDP.
Select
Private IP Specify Private IP address
of Virtual Server rule.
IP Address If a character that can
not be used is entered,
this feature is set to
255.255.255.255.
Remote IP Specify Remote IP
address of Virtual Server
rule.
IP Address If 255.255.255.255 is
entered, this feature is
set to 0.0.0.0.
Public Port Range Specify Public Port range. Unsigned
Number
Private Port Range Specify Private Port
range. For a single port,
the start and end are both
the same.
Unsigned
Number
This feature is
changed in conjunction
with Public Port Range
setting.
Enable To enable the specified
entry of the virtual server,
select the check box.
Check
WAN Interface Specify WAN interface on
which the Virtual Server
rule is configured.
Select
3.7.3 Network Configuration—[8-3] NAT—DMZ
Description
The DMZ settings for NAT can be programmed.
Screen / Tab Setting item Description Input Type Note
3.DMZ Enable To enable or disable the
DMZ setting of the PBX.
Select the check box to
enable.
Check
IP Address of
Virtual DMZ Host
To enter IP Address of the
DMZ host.
IP Address
3.7.3 Network Configuration—[8-3] NAT—DMZ
Programming Item List 77