3.3 Network Configuration—[4] LAN
3.3.1 Network Configuration—[4-2] LAN—LAN Settings
The LAN settings can be programmed.
Screen / Tab Setting item Description Input Type Note
2.LAN
Settings
IP Address Used to enter the LAN
interface IP Address of the
PBX.
IP Address
Subnet Mask To enter the LAN Subnet
Mask of the PBX.
Subnet
Mask3
MAC Address MAC Address of LAN
bridge device. It can be
overridden by specifying
the user supplied MAC
address here.
MAC
Address
DHCP Mode To choose the mode of
DHCP in the PBX's. The
options available are:
Disable, Server and Relay
Agent.
Select
DHCP Server - IP
Pool Starting
Address
DHCPv4 pool start IPv4
address.
IP Address
DHCP Server - IP
Pool Ending
Address
DHCPv4 pool end IPv4
address.
IP Address
DHCP Server -
Lease Time
Select from a dropdown of
allowed values.
Select
DHCP Relay -
DHCP Server IP
Specifies the IP address
for the DHCP server for
DHCP Relay.
IP Address If DHCP Mode is set to
Relay Agent, this item
is displayed.
2.LAN
Settings - IP
Address
Reservation
Click Here Clicking this link displays
the IP reservation screen.
-
2.LAN
Settings - IP
Reservation
HOST NAME Host Computer name. Text
Router2
IP ADDRESS IP Address to be
statistically reserved for
this host identified by MAC
address.
IP Address
MAC ADDRESS MAC address of Host
computer for which static
IP reservation is needed.
MAC
Address2
3.3 Network Configuration—[4] LAN
Programming Item List 63
To Next Page
Loading...
