Screen / Tab Setting item Description Input Type Note
1.Radio
Settings -
WLAN
Advanced
Radio
Settings
WLAN General
Config - Preamble
Preamble Type. Select
WLAN General
Config - Beacon
Interval
Beacon interval in
milliseconds.
Unsigned
Number
WLAN General
Config - DTIM
Interval
Delivery Traffic Indicator
Message (DTIM) interval
in number of beacons.
Unsigned
Number
WLAN General
Config - Power
Level
Power level at which
WLAN AP should operate.
Select
WLAN General
Config - RTS
Threshold
Request to Send in Bytes. Unsigned
Number
WLAN General
Config - Static
Rate in Mbit/s
Static Rate for WLAN AP
in Mbps.
Select If the user changes
any of the following
settings, this setting
will be reset:
• Operational Mode
• Channel Bandwidth
• Guard Interval
802.11n Settings -
Length of MPDU
aggregation
Length of MPDU
aggregation in bytes.
Select
802.11n Settings -
STBC
Space Time Block Coding Select
3.5.2 Network Configuration—[6-2] Wireless—Main AP Settings
The main AP settings can be programmed.
Screen / Tab Setting item Description Input Type Note
2.Main AP
Settings -
WLAN Main
Settings
AP Name Name of Access Point -
unique identifier.
-
SSID Service Set Identifier -
public name of WLAN or
Network.
-
Type Type (AP) -
Security Type of Security. -
Encryption Type of Encryption. -
Authentication Type of Authentication. -
Mode Operation Mode. -
Status Status of AP - UP or
DOWN.
-
3.5.2 Network Configuration—[6-2] Wireless—Main AP Settings
Programming Item List 67
To Next Page
Loading...
