Panasonic KX-HTS32 - Network Configuration-[6-3] Wireless-Security Settings

Screen / Tab Setting item Description Input Type Note
Modify Button Clicking this button allows
you to modify a WLAN AP
configuration.
-
2.Main AP
Settings -
WLAN AP
Configuration
Settings
SSID Service Set Identifier of
AP.
Text Router
SSID
AP Name AP Name - Unique
Identifier within the PBX.
Text
Router2
Maximum Client
Limit
Indicates the maximum
number of stations that
can connect to the
corresponding AP.
Unsigned
Number
Enable Hidden
SSID Mode
Whether to hide SSID in
beacon frames.
Check
AP Isolation Enables or disables the
AP Isolation feature.
Select
3.5.3 Network Configuration—[6-3] Wireless—Security Settings
The wireless security settings can be programmed.
Screen / Tab Setting item Description Input Type Note
3.Security
Settings -
WLAN
Security
Settings
AP name Displays the AP name. Label To change this setting,
refer to 3.5.2 Network
Configuration—[6-2]
Wireless—Main AP
Settings.
SSID Displays the SSID. Label To change this setting,
refer to 3.5.2 Network
Configuration—[6-2]
Wireless—Main AP
Settings.
Security Selection
- Security
Selects the Security. Select
Security Selection
- Authentication
Type
Selects the authentication
type.
Select This feature is
available when the
following settings are
specified:
• Security: Basic and
Encryption
Type:WEP
• Security: Except for
Basic
Security Selection
- Encryption Type
Selects the encryption
type.
Select
3.5.3 Network Configuration—[6-3] Wireless—Security Settings
68 Programming Item List