Screen / Tab Setting item Description Input Type Note
Voice Mail－Send
Email when
Message is left
Specifies the notification
to a subscriber when a
new message is recorded
in his or her mailbox by e-
mail.
Radio When selecting
"Enable", send Voice
Mail recording notice
email to "Contact－
Email Address"
Voice Mail－Delete
Message after
Email
To specify if a sent voice
message is deleted from
the Voice Message
system after it is sent by
e-mail, select "Enable" for
Delete After Send (Voice
File).
Radio If voice message files
are set to be deleted
after they are sent by
e-mail, be aware that a
deleted file cannot be
recovered in the event
that the e-mail is not
sent successfully.
Call Waiting Specifies whether to
receive call waiting
notifications for calls from
a CO line, an extension,
doorphone calls, and calls
via an incoming call
distribution group.
Radio
Extension Dial
Lock (Local)
Specifies the extension
lock or unlock. The pre-
programmed TRS level
will be applied to the
extension when "Lock" is
selected.
Select
2.3.3 PBX Configuration—[2-3] Extension—Flexible Buttons
Description
Each flexible button can be customized to allow one-touch access to a certain feature.
Screen / Tab Setting item Description Input Type Note
3.Flexible
Buttons
Extension Number Specifies the extension
number of the extension.
Select Only the Installer level
account can change
this setting.
Telephone Indicates the type of
telephone and the key
information.
-
Flexible Buttons－
Key Location
Indicates the location
number of flexible buttons.
-
Flexible Buttons－
Type
Specifies the feature to be
assigned to the flexible
button.
Select
Flexible Buttons－
Extension Number/
Dial
Specifies the number to
be dialed.
Select /
Text
Numeric
2.3.3 PBX Configuration—[2-3] Extension—Flexible Buttons
32 Programming Item List
To Next Page
Loading...
