2.4 Fault Recovery/Diagnostics
Feature Guide 195
number will be displayed in order of highest priority to lowest. The System Alarm button light turns off
automatically after all error numbers have been displayed.
For details regarding errors and their solutions, refer to the Installation Manual.
[Error Example]
[Explanation]
Conditions
• System Alarm Button
Any flexible button can be customized as the System Alarm button.
• The alarm information will be logged on the Station Message Detail Recording (SMDR) if enabled
through system programming.
• The PBX can be automatically diagnosed at a preprogrammed time everyday.
Installation Manual References
4.1.5 Troubleshooting by Error Log
Feature Guide References
1.18.2 Flexible Buttons
1.21.1 Station Message Detail Recording (SMDR)
Number in the Example Item Description
(1) Error Code Shows three-digit error code.
(2) Sub Code Shows five-digit sub code (XYYZZ).
X: Cabinet number (1–4)
YY: Slot number (00–11)
ZZ: Physical port number (01–08)
ERR #100 (10000)
(1)
(2)
To Next Page
Loading...
