Panasonic KX-TAW848 - Page 359

4.8 System [2]
Feature Guide 359
Feature Guide References
1.15.6 Direct Inward System Access (DISA)
Accept Wireless XDP Parallel Set by Other PS
Enables the authorization to allow Wireless XDP Parallel Mode to be set by a PS.
Default
Enable
Value Range
Disable, Enable
Programming References
4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
Feature Guide References
1.20.3 Wireless XDP Parallel Mode
Programming Mode Level
Specifies the level of authorization for performing PT programming.
Default
PROG Only
Value Range
Disable: A PT user cannot perform any programming.
PROG Only: A PT user can perform only personal programming.
PROG and PROG **/*#: A PT user can perform personal and system programming.
Programming References
4.10.1 Wired Extension—Extension Settings [4-1-1]—Main—COS
4.10.7 Portable Station—Extension Settings [4-2-1]—Main—COS
Feature Guide References
2.3.2 PT Programming
Manager
Specifies the authorization to use manager features.
Default
Disable
Value Range
Disable, Enable