Panasonic KX-TAW848 - Page 370

4.8 System [2]
370 Feature Guide
Default
Clear
Value Range
No Clear, Clear
Programming References
None
Feature Guide References
1.23.2 Extension Feature Clear
Extension - CO Call Limitation
Selects whether the time limit for extension-to-CO line calls applies to outgoing calls only or for both
outgoing and incoming calls. COS determines the use of this feature, and the length of time limit can be
assigned on a CO line group basis.
Default
for Outgoing
Value Range
for Outgoing, for Outgoing + Incoming
Programming References
4.8.14 Class of Service—COS Settings [2-7-1]—TRS / CO—Extension-CO Line Call Duration Limit
4.9.1 Trunk Group—TRG Settings [3-1-1]—Main—Extension-CO Duration Time
Feature Guide References
1.10.7 CO Line Call Limitation
Save the Dial as Redial after Called Party's Answer
Specifies whether the number of the connected party to use for redialing is saved.
Default
Ye s
Value Range
No, Yes
Programming References
None
Feature Guide References
1.6.1.3 Last Number Redial