4.9 Groups [3]
Feature Guide 411
Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone is
not sent to any VM port.)
Default
Enable
Value Range
Disable, Enable
Programming References
4.7.11 Extension Port [1-5]
Feature Guide References
1.19.1 Voice Mail (VM) Group
Intercept to Mailbox
Enables the PBX to send the mailbox number of the called extension to the VPS when a CO line call is
redirected to the VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number, the
VPS answers the call with the appropriate mailbox.
Default
Enable
Value Range
Disable, Enable
Programming References
4.7.11 Extension Port [1-5]
4.9.1 Trunk Group—TRG Settings [3-1-1]—Intercept—Intercept Destination—Day, Lunch, Break, Night
4.10.1 Wired Extension—Extension Settings [4-1-1]—Option 1—Intercept Destination—Day, Lunch, Break,
Night
4.10.7 Portable Station—Extension Settings [4-2-1]—Option 1—Intercept Destination—Day, Lunch, Break,
Night
Feature Guide References
1.19.1 Voice Mail (VM) Group
1.19.2 Voice Mail DPT (Digital) Integration
Transfer Recall to Mailbox
Enables the PBX to send the mailbox number of the transfer destination extension to the VPS when a call
is transferred to an extension by the Call Transfer without Announcement feature using the Automated
Attendant (AA) service of the VPS and the call is not answered within a programmed time period, or when
the VPS is assigned as the Transfer Recall destination of a certain extension. When the VPS receives the
mailbox number, the VPS answers the call with the appropriate mailbox.
To Next Page
Loading...
