Panasonic KX-TAW848 - Page 415

4.9 Groups [3]
Feature Guide 415
Feature Guide References
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
VM DTMF Status Signal—Confirm
Specifies the DTMF status signal the PBX sends to the VPS when a certain feature (e.g., Message Waiting)
has been successfully set or canceled on an extension.
Default
9
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
VM DTMF Status Signal—Disconnect
Specifies the DTMF status signal the PBX sends to the VPS when the caller hangs up.
Default
#9
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
VM DTMF Status Signal—FWD to VM Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to the VPS
and the PBX is calling another port of the VPS.
Default
6