Panasonic KX-TAW848 - Page 450

4.10 Extension [4]
450 Feature Guide
Default
Disable
Value Range
Disable, Enable
Programming References
4.8.25 Extension Caller ID [2-11]—Extension Caller ID Resource-1, 2
Feature Guide References
1.16.1 Caller ID
Incoming Call Wait Timer for Extension Caller ID
Specifies the length of time the ringing for a call is delayed when the call follows immediately after the
previous unanswered call. When receiving two calls in quick succession (e.g., when a call waiting in a queue
is directed to an extension immediately after the previous call stops ringing), some SLTs require a pause,
after the first call stops ringing, to receive the second call's Caller ID information.
Note that the setting of this parameter is only effective when a resource for sending extension Caller ID is
assigned in Extension Caller ID Resource-1, 2 for the port in Extension Caller ID [2-11].
Default
0 s
Value Range
0–15 s
Programming References
4.8.25 Extension Caller ID [2-11]—Extension Caller ID Resource-1, 2
Feature Guide References
1.16.1 Caller ID
FWD / DND Reference
Call Forwarding (FWD) and Do Not Disturb (DND) settings for each extension can be referred. FWD and
DND settings can be programmed separately for each extension in Wired Extension—FWD/DND [4-1-2].
Slot
Indicates the slot position of each extension card (reference only).
Default
Current slot number
Value Range
Slot number