1.9 Automatic Route Selection (ARS) Features
82 Feature Guide
[Command Explanation]
[Programming Example: Carrier Table]
6. ARS Options
Authorization Code for Tenant
A Carrier Authorization Code can be assigned to each tenant.
Authorization Code for CO Line Group
A Carrier Authorization Code can be assigned to each CO line group.
Itemized Billing Code
An Itemized Billing Code can be assigned for each extension and for each verified code.
If a call is not made from an extension, such as via Direct Inward System Access (DISA), and no verified
code is used, the Itemized Billing Code assigned to location 1 in the Verified Code Table will be used.
*1
→ ARS Carrier Name [350]
*2
→ ARS CO Line Group for Carrier Access [351]
*3
→ ARS Carrier Access Code [353]
*4
→ ARS Removed Number of Digits for Carrier Access [352]
Command
Description
Inserts the Carrier Access Code
Inserts the user-dialed number minus any removed digits
Inserts a pause
Inserts the Authorization Code for Tenant
Inserts the Authorization Code for CO Line Group
Inserts the Itemized Billing Code
You can enter any of these digits in a modify command
C
H
P
A
G
I
[0-9, , #]
In this example
Dialed number: 9-1-212-555-5555
Modification:
9 1 2125555555 0880 2125555555
Remove 1 digit Add the Carrier Access Code
CO Line Access no. is ignored
Carrier A
1, 2, 3
0880
1
CH
Carrier Name
*1
CO Line Group
*2
Carrier Access Code
*3
Removed No. of Digits
*4
Modify Command
Carrier J
4
0700
3
CPH
Carrier 1 Carrier 2
To Next Page
Loading...
