Panasonic KX-TDA100D

Removed Number of Digits
9
: Assign the number of digits to remove from the beginning of the
user-dialled number.
® 10.6 [8-5] Carrier—Carrier—
Removed Number of Digits
® [352] ARS Removed Number of Digits for Carrier Access
Carrier Access Code
10
: Assign the code to access the carrier.
® 10.6 [8-5] Carrier—Carrier—
Carrier Access Code
® [353] ARS Carrier Access Code
Trunk Group
11
: Assign the trunk groups which connect to each carrier.
® 10.6 [8-5] Carrier—TRG 01–TRG 64
® [351] ARS Trunk Group for Carrier Access
Modify Command
12
: Assign the commands to modify the dialled number to access the carrier.
® 10.6 [8-5] Carrier—Carrier— Modify Command
[Command Explanation]
Command
Description
Number Add the number.
C Add the Carrier Access code.
P Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF) signal.
A Add the Authorisation code for a tenant (
13
).
G Add the Authorisation code for a trunk group (
14
).
I Add the Itemised Billing code (
15
).
H Add the dialled number after the digits are removed (Home position).
[Programming Example]
A telecom
6
0077
1, 2, 3
CH#12
Carrier Name
Removed Number of Digits
Carrier Access Code
Trunk Group
Modify Command
Carrier Table
7
9
10
11
[Example]
Dialled number: 0123456789
(Trunk Access no. is ignored.)
Modification:
012345 6789 0077 6789 #12
Remove 6 digits.
9
12
Add the Carrier Access
code ( ).
C
H
8
12
B telecom
0
0088
1, 2
CH
#12
Add the number.
1
2
10
6. Optional Assignment
Feature Guide 145
1.10.1 Automatic Route Selection (ARS)