Panasonic KX-TDA100D

Location No.
*1
Name
*2
CLI
*3
Destination
*4
Day Lunch ... Day Lunch ...
0001 123-4567 John
White
Enable Disable ... 105 100 ...
0002 123-2468 Tom
Smith
Enable Disable ... 102 100 ...
0003 123-456 A
company
Enable Disable ... 101 101 ...
: : : : : : : : :
*1
® 12.3 [10-3] DDI / DID Table— DDI / DID Number
® [451] DID Number
*2
® 12.3 [10-3] DDI / DID Table— DDI / DID Name
® [452] DID Name
*3
® 12.3 [10-3] DDI / DID Table— CLI Ring for DDI/DID—Day, Lunch, Break, Night
*4
® 12.3 [10-3] DDI / DID Table— DDI / DID Destination—Day, Lunch, Break, Night
® [453] DID Destination
Note
Tenant number and VM trunk group number can also be assigned in the DID/DDI table. Tenant number is
used to determine the time mode (day/lunch/break/night) for the corresponding DID/DDI number. VM trunk
group number is used in Voice Mail DPT (Digital) Integration (® 1.24.3 Voice Mail DPT (Digital)
Integration).
Explanation:
If the DID/DDI number is "123-4567":
1. Checks the number in the table.
® Matches the number in location 0001.
2. Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DID/DDI destination, extension 100.
Conditions
• To use this feature, DID/DDI service must be assigned as the distribution method for a trunk port.
• DID/DDI Number Modification
It is possible to modify a received DID/DDI number, which may be convenient when programming the DID/
DDI table. The modification method (removed number of digits/added number) can be programmed on a
trunk port basis.
[Modification Example]
Removed number of digits: 6
Added number: 10
Received DID/DDI number: 87654321
Modified DID/DDI number: 876543 21 = 1021
1) Remove the
first 6 digits.
2) Add "10".
• Inter-digit Time
When the Inter-digit time expires, the PBX stops receiving the DID/DDI number and starts to check the
DID/DDI table. (Refer to the [Programming Example of DID/DDI Table] above).
Feature Guide 21
1.1.1 Incoming Trunk Call Features