Panasonic KX-TDA100D

This PBX supports 4 modification tables, each of which can be used for any number of trunk groups. Each
table has 10 locations for local/international calls and one for long distance calls. The PBX checks the local/
international call data first. If a match is not found, the long distance call data is applied.
[Example]
012
Local/International
Call Data 1
Local/International
Call Data 2
:
Local/International
Call Data 10
Long Distance
Call Data
Area Code Removed No. of Digits
Added No.
Trunk
Group No.
1
2
:
Modification
Table
1
3
:
Modification Table 1
00
:
Not
programmable
3
2
0
:
001
:
Blank
0
<Table Selection>
<Modification Table>
Note
When caller’s information is sent through an ISDN line and the call type is Subscriber, National, or
International, the following modification table is used instead of the above table:
Subscriber Call Data
National Call Data
International Call Data
Removed No. of Digits
Added No.
<Modification Table>
0
0
0
Blank
0
00
Feature Guide 211
1.18.1 Caller ID