Feature
Default
Type 1
(with )
Type 2
(without )
Call Hold/Call Hold Retrieve 50 50
Call Hold Retrieve—Specified with a Holding Extension Number 51 51
Call Park/Call Park Retrieve 52 52
Call Hold Retrieve—Specified with a Held Trunk Number 53 53
Door Open 55 55
External Relay 56 56
External Feature Access 60 60
ISDN Hold 62 None
COLR set/cancel 7 0 7 0
CLIR set/cancel 7 1 7 1
Switch CLIP/COLP of the Trunk/Extension 7 2 7 2
MCID 7 3 None
ISDN-FWD set/cancel/confirm 7 5 None
Message Waiting set/cancel/callback 70 70
FWD/DND set/cancel—Both 710 710
FWD/DND set/cancel—External 711 711
FWD/DND set/cancel—Internal 712 712
FWD/DND No Answer Timer set 713 713
Group FWD set/cancel—Both 714 714
Group FWD set/cancel—External 715 715
Group FWD set/cancel—Internal 716 716
Call Pickup Deny set/cancel 720 720
Paging Deny set/cancel 721 721
Walking Extension 727 727
Data Line Security set/cancel 730 730
Manual Call Waiting for Extension Call off/BSS/OHCA/Whisper
OHCA
731 731
Automatic Call Waiting set/cancel 732 732
Executive Busy Override Deny set/cancel 733 733
Not Ready Mode on/off 735 735
Log-in/Log-out 736 736
Incoming Call Queue Monitor 739 739
398 Feature Guide
2.3.6 Flexible Numbering/Fixed Numbering