Panasonic KX-TDA100D

3. Fixed Numbering (available while dialling or talking)
The features which are available while dialling or talking have fixed numbers as shown in the following
table:
[Fixed Numbering Table (available while dialling or talking)]
Feature Fixed Numbering
Pulse to Tone Conversion
Conference 3
Door Open 5
Conditions
• All features have a default feature number.
• The following are examples of feature number conflicts: 1 and 11, 0 and 00, 2 and 21, 10 and 101, 32 and
321, etc.
• Feature number + Additional number (Parameter)
Some flexible feature numbers require additional digits to make the feature active. For example, to set Call
Waiting, the feature number for "Call Waiting" must be followed by "1" and to cancel it, the same feature
number should be followed by "0".
• If a feature number includes "
" or "#", rotary SLT users cannot use it.
• ISDN extension users cannot use the following features:
– OGM playback/record
– Call Hold/Call Hold Retrieve (held at its own extension)
– ISDN Hold
– MCID
– Walking Extension
– Call Waiting
– Hot Line
– Timed Reminder
– Executive Busy Override
– Call Monitor
– Automatic Callback Busy/CCBS
• PS users cannot use the following features:
– Personal Speed Dialling
– OGM playback/record
– S-CO Line Access
– Walking Extension
– BGM set/cancel
– Timed Reminder
• A PS can only be assigned an extension number of 4 digits or less.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main
→Extension
→Features
→Other PBX Extension
4.9 [2-6-2] Numbering Plan—Quick Dial
400 Feature Guide
2.3.6 Flexible Numbering/Fixed Numbering