How to fix distorted external music on Panasonic KX-TDA100D PBX?
If you are experiencing distorted external music on your Panasonic PBX, the input level from the external music source might be too high. Decrease the output level of the external music source using its volume control.
Why aren't alternate calling features working on my Panasonic KX-TDA100D PBX wireless phone?
If Alternate Calling (Ring/Voice) and Live Call Screening (LCS) do not function as set when using a Wireless Phone (KX-TD7894/KX-TD7895) on your Panasonic PBX, it is because voice-calling mode and hands-free mode with LCS are not available with Wireless Phones. Switch the calling mode to ring-calling or set the LCS mode to 'Private'.
Why is there no sound in speakerphone mode on Panasonic KX-TDA100D?
If you cannot hear anything when using the speakerphone/monitor mode with a DPT on your Panasonic PBX, the 'HEADSET' mode might be selected in Personal Programming. If you are not using a headset, select the 'HANDSET' mode via Personal Programming.
How to fix a Panasonic PBX phone that doesn't ring?
If your Panasonic PBX phone (PT) is not ringing, the ringer volume might be turned off. Turn on the ringer volume to resolve this.
Why can't I make outside calls on my Panasonic KX-TDA100D?
If you cannot originate an outside call, transfer a call, or set up a conference on your Panasonic PBX, it could be because the corresponding CO button does not exist on the PT. To resolve this, program the CO button.
How to fix a Panasonic PBX that does not operate properly?
If your Panasonic PBX is not operating properly, try the following steps: * Press the Reset Button. * Turn the power switch off, and then turn it back on. * Turn off the power switch, unplug the PBX, wait 5 minutes, plug it back in, and turn the power switch back on.
What to do if extensions on Panasonic KX-TDA100D don't work during power outage?
During a power failure, if extensions connected to ports 1 to 2 of MCSLC16/MCSLC24 do not operate on your Panasonic PBX, it might be because a DPT is connected to the extension port. Disconnect the DPT and connect an SLT instead. Also, ensure that the dialling mode (tone or pulse) is correctly set. If it isn't, set the Tone/Pulse switch to the alternative position.
General| Type | Hybrid IP-PBX |
|---|---|
| Maximum Extensions | 128 |
| VoIP Compatibility | Yes |
| Power Supply | AC 100-240 V, 50/60 Hz |
| IP Extensions | 64 |
| DHCP Server | Yes |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
To Next Page
