Panasonic KX-TDA30

1.18 Caller ID Features
226 Feature Guide
3. Number/Name Assignment
3.1 Automatic Caller ID Number Modification
This PBX automatically modifies the incoming caller's number according to preprogrammed tables.
The modified number will be recorded for calling back.
This PBX supports 4 modification tables, each of which can be used for any number of trunk
groups. Each table has 10 locations for local/international calls and one for long distance calls.
The PBX checks the local/international call data first. If a match is not found, the long distance call
data is applied.
[Example]
Note
When caller's information is sent through an ISDN line and the call type is Subscriber,
National, or International, the following modification table is used instead of the above table:
012
Local/International
Call Data 1
Local/International
Call Data 2
:
Local/International
Call Data 10
Long Distance
Call Data
Area Code Removed No. of Digits
Added No.
Trunk
Group No.
1
2
:
Modification
Table
1
3
:
Modification Table 1
00
:
Not
programmable
3
2
0
:
001
:
Blank
0
<Table Selection>
<Modification Table>
Subscriber Call Data
National Call Data
International Call Data
Removed No. of Digits
Added No.
<Modification Table>
0
0
0
Blank
0
00