1.26 Administrative Information Features
306 Feature Guide
[Programmable Items]
(6) Ring Shows the ring duration before answering a call in Minutes/
Seconds.
(7) Duration Shows the duration of the trunk call in Hours/Minutes/Seconds.
(8) Acc Code
(Account Code)
Shows the account code appended to the call. (→ 1.5.4.3 Account
Code Entry)
(9) CD (Condition
Code)
Shows other call information with the following codes:
CL: Collect call
TR: Transfer
FW: FWD to trunk
D0: Call using DISA or TIE line service
RM: Remote maintenance (modem) (→ 2.3.1 PC Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
(10) Cost Shows the call charge.
Item Description
Outgoing trunk call Controls whether the outgoing trunk calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Outgoing Call
→ [804] SMDR Outgoing Call Printing
Incoming trunk call Controls whether the incoming trunk calls are shown.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Incoming Call
→ [805] SMDR Incoming Call Printing
Outgoing intercom call Controls whether the outgoing intercom calls are recorded.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Intercom Call
Log-in/Log-out status Controls whether the log-in/log-out status is recorded.
→ 2.17.1 [11-1] Main—SMDR—Print Information—Log-in / Log-
out
ARS dial Controls whether the user-dialled number or the modified number
is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (→ 1.10.1 Automatic Route
Selection (ARS))
→ 2.17.1 [11-1] Main—SMDR—SMDR Options—ARS Dial
Number in
the Pattern
Item Description
To Next Page
Loading...
