Panasonic KX-TDA30

1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Feature Guide 71
[Available Destinations]
Conditions
[General]
• FWD for Trunk Calls/Intercom Calls
The extension user can set the FWD feature for trunk calls, for intercom calls, or for both.
• FWD from Incoming Call Distribution Group (Group FWD)
COS programming determines the incoming call distribution groups that can use this feature.
• FWD to Trunk
COS programming determines the extensions or incoming call distribution groups that can forward calls
externally.
The original extension's TRS/Barring and ARS still apply to the forwarded call.
• Trunk Call Duration
The duration of a trunk call can be restricted by a system timer. Trunk call duration is assigned
separately for calls between an extension user and an outside party, and calls between two outside
parties.
If the timer expires, the line will be disconnected. (→ 1.11.8 Trunk Call Limitation)
Destination Availability
Condition for Original Extension/
Incoming Call Distribution Group
Wired Extension (PT/SLT/ISDN Extension/T1-
OPX)
Only available when FWD to
extension is allowed through COS
programming.*
PS
Incoming Call Distribution Group
PS Ring Group –
Floating Extension no. for SVM –
VM Group (DTMF/DPT) –
External Pager (TAFAS) –
DISA Only available for incoming trunk
calls. Incoming intercom and
doorphone calls cannot be forwarded
to a DISA floating extension number.
Analogue/ISDN Remote Maintenance –
Idle Line Access no. + Phone no. Only available when FWD to trunk is
allowed through COS programming.
Trunk Group Access no. + Trunk Group no. +
Phone no.
Other PBX Extension (TIE with no PBX Code) –
Other PBX Extension (TIE with PBX Code) Only available when FWD to trunk is
allowed through COS programming.
*: If an extension user is not permitted by COS to call a certain extension (→ 1.1.2.2 Internal Call Block),
the FWD feature will not function if that extension is set as the forwarding destination.