To Next PageTo Next Page
What to do if the ALARM indicator on my Panasonic PBX is red?
If the ALARM indicator on the front of your Panasonic PBX cabinet turns red, it indicates a major system error. Check the error log using the Maintenance Console to diagnose the issue.
Why aren't parallel single line phones ringing on my Panasonic KX-TDA30 PBX?
If the paralleled single line telephones do not ring on your Panasonic PBX, "No ring" may be selected. Change the setting to ring.
What to do if my Panasonic KX-TDA30 shows improper operation?
If your Panasonic PBX exhibits improper operation, press the Reset Button.
Why originating an outside call cannot be performed on Panasonic KX-TDA30 PBX?
If you cannot originate an outside call, transfer a call, or start a conference on your Panasonic PBX, the corresponding CO button may not be programmed on the PT. Program the CO button.
What to do if I cannot remember Panasonic KX-TDA30 PBX feature numbers?
If you cannot remember the feature numbers for your Panasonic PBX, if the feature numbers have been changed from the default values, write the new feature numbers in the table in "4.2.1 Feature Number Table". You can also ask your dealer to change the feature numbers for easier use.
How to fix a poorly displayed screen on Panasonic KX-TDA30 PBX?
If the display is not shown well on your Panasonic PBX, change the Display contrast level.
How to fix noise on external paging on Panasonic KX-TDA30 PBX?
If you experience noise on external paging with your Panasonic PBX, it might be due to induced noise on the wire between the PBX and the amplifier. Use a shielded cable for the connection, and a short cable is recommended.
What to do if my Panasonic KX-TDA30 proprietary telephone does not have a feature button?
Some models do not have the feature button. In this case, change a flexible button to the desired button or enter the specified feature number instead of the feature button.
What to do if I cannot use the telephone Panasonic?
If you cannot use the telephone, it might be locked, so unlock it. Alternatively, if your telephone is connected to an eXtra Device Port, system programming is required; consult your dealer.
What to do if some features do not work on my Panasonic Telephone?
If some features aren't working, system management might be restricting them, so consult your manager. Alternatively, the feature numbers may have changed, so confirm the revised number and try again.
General| Number of users | 52 user(s) |
|---|---|
| DECT connectable | Yes |
| Number of DECT cell stations | 4 |
| RS-232 ports | 1 |
| RJ-11 ports quantity | 2 |
| AC input voltage | 110-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 55 W |
Weight and Dimensions| Weight | 3500 g |
|---|---|
| Dimensions (WxDxH) | 275 x 117 x 376 mm |
