138
SQW0038
Adjusting the focus and brightness (exposure)
Setting the ISO Sensitivity
Setting the incremental value of ISO Sensitivity
Recording mode:
You can change the setting to increase ISO Sensitivity by 1 EV or 1/3 EV.
→ [Rec] → [ISO Increments]
[1/3EV]
[L.100]
*
/ [L.125]
*
/ [L.160]
*
/ [200] / [250] / [320] / [400] / [500] / [640] / [800] / [1000] /
[1250] / [1600] / [2000] / [2500] / [3200] / [4000] / [5000] / [6400] / [8000] / [10000] /
[12800] / [16000] / [20000] / [25600]
[1 EV]
[L.100]
*
/ [200] / [400] / [800] / [1600] / [3200] / [6400] / [12800] / [25600]
*
Only when [Extended ISO] is [ON].
●
When this setting is changed from [1/3EV] to [1 EV], the setting for [Sensitivity] may be changed.
(The closest ISO Sensitivity that can be set for [1 EV] will be used.)
Extending the ISO Sensitivity setting
Recording mode:
You can extend the numeric values that can be set for ISO Sensitivity.
→ [Rec] → [Extended ISO]
Settings: [ON] / [OFF]
To Next Page
Loading...
