182
SQW0038
Stabiliser, Zoom and Flash
Taking pictures using the flash (supplied)
Setting the 2nd curtain sync
Recording mode:
2nd curtain sync is a recording method in which the flash fires just before the shutter
closes when you take a picture of a moving subject (such as a car) using the flash with a
slow shutter speed.
1
Set the menu
→ [Rec] → [Flash] → [Flash Synchro]
2
Press to select the setting item and press [MENU/SET]
[1ST] 1st curtain sync is the normal recording method
when using the flash.
[2ND] The light source is captured in back of the subject
and this produces a picture that is vibrant and
lively.
●
Normally, set to [1ST].
●
If you set to [2ND], [2nd] will be displayed in the flash icon on the screen.
●
[2ND] is available only when [Wireless] in the [Flash] is set to [OFF]. (→184)
●
The [Flash Synchro] setting functions even when an external flash other than the supplied flash is
used. (→291)
●
When a fast shutter speed is set, the [Flash Synchro] effect may not be sufficiently achieved.
●
When [2ND] is set, you cannot set the flash setting to [ ] or [ ].
To Next Page
Loading...
