287
SQW0038
Connecting with other devices
Printing
You can connect directly to a PictBridge-compatible printer for printing.
• Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.
Preparations
• Adjust the print quality or other settings on your printer, as needed.
• Turn on the camera and printer.
1
Connect camera to printer
• Check the plug direction and insert it straight in. (If the cable is inserted in the wrong direction,
the plug could become deformed and cause faulty operation) Also, do not insert into the wrong
socket. Doing so may cause damage to this unit.
• Do not use any other USB connection cables except the supplied one or a genuine Panasonic
USB connection cable (DMW-USBC1: optional). Using cables other than the above may cause
a malfunction.
Align the marks, and insert.
[AV OUT/DIGITAL] socket
• Do not disconnect the USB connection cable
(supplied) when the cable disconnection icon [
] is
displayed (may not be displayed with some printers).
USB connection cable (supplied)
2
Use to select [PictBridge(PTP)] and press [MENU/SET]
3
Use to select a picture and press [MENU/SET]
4
Use to select [Print start] and press [MENU/SET]
(Print settings (→290))
■
To cancel print
Press [MENU/SET].
To Next Page
Loading...
