121
SQW0038
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
Changing the position and size of the AF area
■
When selecting [ ] / [ ]
You can change the position and size of the AF area.
Select [ ] or [ ] and press
• The AF area setting screen appears.
To change the AF area
To move the position of the AF area: Press
To change the size of the AF area: Turn the control dial
• If you set the AF area to an eye in the yellow frame when [
] is
selected, the eye to be used for focusing will be changed.
• To restore the AF area to its initial state (position)
→ Press [DISP.] button.
Press [MENU/SET]
■
When selecting [ ]
You can set the focus position by selecting an AF area group. The AF area, which is
configured with 49 points, is divided into groups consisting of 9 points each (6 points or
4 points for the groups located at the edges of the screen).
Select [ ] and press
• The AF area setting screen appears.
Press to select an AF area group
Press [MENU/SET]
• Only the [+] indications (centre points of the selected group) remain on
the screen.
• To cancel the settings for the AF area frame, press [MENU/SET].
Examples of group
To Next Page
Loading...
