122
SQW0038
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
■
When selecting [ ]
You can enlarge the screen to perform more precise settings of the focus position.
• You cannot set the focus position at the edges of the screen.
Select [ ] and press
Use to set the focus position and press [MENU/SET]
• The enlarged assist screen will appear for setting the focus position.
Move [+] to the focus position with
• Pressing [DISP.] button will bring the focus position back to the
centre of the assist screen.
Changing the display of the assist screen
→ [Custom] → [Pinpoint AF Display]
[FULL]: Enlarges the assist screen using the entire screen.
[PIP]: Enlarges the assist screen on part of the screen.
• When [PIP] is selected, the size of the screen is enlarged or reduced approximately 3
times to 6 times. When [FULL] is selected, the size of the screen is enlarged or reduced
approximately 3 times to 10 times. Enlarge or reduce the screen by magnification
factors of x1 steps using the control dial.
Setting the timeout for the enlarged display
→ [Custom] → [Pinpoint AF Time] →
[LONG] (approx. 1.5 seconds) / [MID] (approx. 1.0 seconds) /
[SHORT] (approx. 0.5 seconds)
• If you release the shutter button, the enlarged display will turn off even before the
screen timeout.
To Next Page
Loading...
