123
SQW0038
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
Enabling/disabling use of cursor button to move the AF area
→ [Custom] → [Direct Focus Area] → [ON] / [OFF]
When [
], [ ], or [ ] is selected, you can move the AF area and when [ ] is
selected, you can move the enlarged position.
• When [Custom Multi] such as [ ] is selected, the AF area setting screen is displayed.
• Use the Quick menu (→34) to set functions to be assigned to the cursor button, such as
[Drive Mode], [White Balance] and [Sensitivity].
●
When you set [Metering Mode] (→139) to [ ] (Spot), the metering target will move along with the
AF area. When the AF area is moved to the edges of the screen, the metering operation may be
affected by the surrounding brightness.
Not available in the following cases:
●
[Direct Focus Area] is fixed to [OFF] in the following case:
• When the picture effect (Filter) is set
●
The position and size of the AF area cannot be changed in the Digital Zoom range.
To Next Page
Loading...
