143
SQW0038
Shutter and Drive Settings
Burst function
4
Focus on the subject and take a picture
• Hold down the shutter button fully to activate the Burst
Mode.
50
i
■
To cancel burst
In step
2
, select [ ] ([Single]) or [ ].
Focusing in burst mode
Focusing varies depending on the focus mode (→114) and the setting of [Focus/Release
Priority] (→125) in the [Custom] menu.
Focus mode [Focus/Release Priority] Focus
[AFS]
[FOCUS]
At the first picture
[RELEASE]
[AFF] / [AFC]
*
1
[FOCUS]
Normal focusing
*
2
[RELEASE]
Predicted focusing
*
3
[MF] — Focus set with Manual Focus
*
1
Focus is fixed in the first picture when dark subjects are recorded or the burst speed is set to [SH].
*
2
Since the camera records a burst of pictures while it adjusts the focus, the burst speed may be
slower.
*
3
The camera predicts the focus within a possible range by giving higher priority to the burst speed.
To Next Page
Loading...
