185
SQW0038
Stabiliser, Zoom and Flash
Taking pictures using the flash (supplied)
2
Set the menu
→ [Rec] → [Flash] → [Wireless]
3
Press to select [ON] and press [MENU/SET]
• When [Wireless] is set to [ON], [WL] will appear with the flash icon on the recording screen.
• To perform detailed settings for the wireless flash, perform the following settings from the [Flash].
4
Press to select [Wireless Channel] and press
[MENU/SET]
Firing Mode Flash output
Luminosity ratio
5
Press to select the channel and press [MENU/SET]
• Select the same channel as the channel set for the wireless flash
in step
1
.
6
Press to select [Wireless Setup] and press
[MENU/SET]
7
Use to select the item and press [MENU/SET]
• Press the [DISP.] button to perform a test firing.
[External
Flash]
[Firing
Mode]
[TTL]: The camera automatically sets the flash output.
[AUTO]
*
: Sets the flash output using an external flash.
[MANUAL]: Manually sets the flash ratio of an external flash.
[OFF]: An external flash fires only for a communication light emission.
[Flash
Adjust.]
Adjusts the flash output of an external flash manually when [Firing
Mode] is set to [TTL].
[Manual
Flash
Adjust.]
Sets the flash ratio of an external flash when [Firing Mode] is set to
[MANUAL].
• You can set the flash ratio from [1/1] (flash firing full power) to [1/64]
in 1/3 steps.
[A Group]/
[B Group]/
[C Group]
[Firing
Mode]
[TTL]: The camera automatically sets the wireless flash output.
[AUTO]: Sets the flash output using the wireless flash.
[MANUAL]: Manually sets the flash ratio of the wireless flash.
[OFF]: The wireless flashes of the set group do not fire.
[Flash
Adjust.]
Adjusts the flash output of the wireless flash manually when [Firing
Mode] is set to [TTL].
[Manual
Flash
Adjust.]
Sets the flash ratio of the wireless flash when [Firing Mode] is set to
[MANUAL].
• You can set the flash ratio from [1/1] (flash firing full power) to [1/64]
in 1/3 steps.
*
When the flash (supplied) is attached to this unit, you cannot perform these settings.
To Next Page
Loading...
