230
SQW0038
Wi-Fi
Operating the camera by connecting it to a smartphone
■
Using an iOS device
• When reading a QR Code to connect
(Steps
to are not necessary when reconnecting.)
Start “Image App” (→228)
Select [QR Code] → [OK]
Read the QR Code displayed on this unit with “Image App”
(When you press [MENU/SET] on the camera, the QR code is displayed in an
enlarged size.)
Install the IMAGE APP profile
Select [Install]
*
, then select [Install Now]
*
→ [Done]
*
.
• The message is displayed in the Web browser.
• If a passcode is required to unlock the smartphone, you will have to
input the passcode.
Press the home button to close the Web browser
Select [Wi-Fi]
*
under [Settings]
*
on the smartphone
Turn on [Wi-Fi]
*
and select the SSID displayed on this unit
Return to the home screen and start “Image App” (→228)
*
The display may differ depending on the system language setting.
To Next Page
Loading...
