279
SQW0038
Connecting with other devices
Viewing on TV screen
■
Other related operations
Turning the unit OFF
• The camera can also be turned off when the television is turned off with the remote
control.
Automatic input select
• This function automatically switches the television input to the camera screen
whenever the camera is turned on while it is connected via the HDMI micro cable.
The television can also be switched on via the camera from Standby Mode
(if “Power on link” on the television is set to “on”).
• If VIERA Link (HDMI) does not function correctly (→323)
●
Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the
HDMI standards will not work.
“High Speed HDMI micro cable” (Type D-Type A plug, up to 2 m (6.6 feet) long)
●
If you do not know if your TV is VIERA Link (HDMI) compatible, see the TV’s operating
instructions.
●
Cables that do not comply with HDMI standards will not work.
●
When VIERA Link is activated, the [HDMI Mode] setting of this unit is automatically recognised.
●
If the [VIERA Link] setting on the camera is [ON], operations via the camera buttons will be limited.
●
Ensure that the television you are connecting to has been set up to enable VIERA Link (HDMI)
(consult your television operating instructions for details).
To Next Page
Loading...
